ADT® Authorized Dealer Serving Nashville & Surrounding Areas
Carbon monoxide detector attached to wall of home
January 08, 2024

Where To Place Carbon Monoxide Detectors In Your Nashville House

Property owners must safeguard against a variety of risks like fire, burglary, and flooding. But what about a danger that can’t be discerned by human senses? Carbon monoxide is different from other risks as you may never realize it’s there. Despite that, implementing CO detectors can simply shield your loved ones and property. Explore more about this dangerous gas and where to place carbon monoxide detectors in your Nashville residence.

What Is Carbon Monoxide?

Called the silent killer as of a result of its lack of color, odor, or taste, carbon monoxide is a commonly found gas caused by the incomplete combustion of fuels. Any fuel-consuming appliance like a fireplace or furnace may generate carbon monoxide. Even though you normally won’t have problems, difficulties can present when equipment is not routinely maintained or properly vented. These missteps could lead to a build-up of this potentially deadly gas in your home. Generators and heating appliances are commonly to blame for CO poisoning.

When in contact with low levels of CO, you may suffer from dizziness, headaches, fatigue nausea, or vomiting. Continuous exposure to high amounts can cause cardiorespiratory failure, coma, and death.

Tips For Where To Place Nashville Carbon Monoxide Detectors

If your home lacks a carbon monoxide detector, purchase one today. Preferably, you should have one on every floor of your home, including basements. Here are several tips on where to place carbon monoxide detectors in Nashville:

  • Place them on every level, specifically in places where you utilize fuel-burning appliances, like furnaces, gas dryers, fireplaces, and water heaters.
  • Always install one within 10 feet of bedrooms. If you only install one CO detector, this is where to put it.
  • Position them approximately 10 to 20 feet from sources of CO.
  • Avoid installing them right beside or above fuel-burning appliances, as a bit of carbon monoxide might be released when they turn on and trigger a false alarm.
  • Secure them to walls approximately five feet off the floor so they may measure air where inhabitants are breathing it.
  • Avoid putting them in dead-air zones and near windows or doors.
  • Install one in areas above garages.

Inspect your CO detectors routinely and maintain them in accordance with manufacturer instructions. You will usually have to switch them out in six years or less. You should also ensure any fuel-burning appliances are in in proper working shape and have adequate ventilation.